Spärkel logo
Spärkel logo

All articles

Flashing LightsUpdated 6 months ago

If the lights on your Spärkel System, blink, stay on, or the system stops randomly during the cycle, there may be an issue with the metal switch that allows the system to start properly (as seen below) or with the bottle base. Here's what we suggest:

1. With the appliance unplugged, spray hot (not boiling) water under the top lid latch. We've attached a video to guide you: https://www.youtube.com/watch?v=w3dWtWlf-Co

2. Then use a towel soaked with warm/hot water to carefully wipe the areas around the entire top lid and funnel area to remove any obstruction or carbonator residue.

3. Wipe the button on the front and make sure they all press freely.

4. Make sure the base where the bottle sits is moving freely. If it does not, we recommend making sure the appliance is still unplugged, then tilt the front of the appliance over a sink, and pour some warm/hot water on the bottle base, and press on it to make it move up and down.

Let the unit dry for a few hours before plugging the unit again. If issues persist, please leave a ticket.
Was this article helpful?